ASA-CF - Black (s kolutom) 1kg
Bambu Lab
Bambu ASA-CF je zasnovan za zahtevne zunanje pogoje in zagotavlja izjemno odpornost na vremenske vplive in UV-sevanje. Ohranja prednosti ASA, hkrati pa z dodatkom ogljikovih vlaken povečuje togost in dimenzijsko stabilnost. Zaradi tega je idealna izbira za velike modele, ki zahtevajo vzdržljivost in natančnost v zahtevnih okoljih.
Lastnosti izdelka
· Izjemna vzdržljivost na prostem
· Optimiziran za velike modele
· Eleganten mat zaključek
· Povečana togost za uporabo pri visokih obremenitvah
· Premer: 1,75 mm ± 0,03 mm
Opozorila za uporabo
· Združljivo z AMS
· Ni združljivo z AMS lite
· Zahtevani tiskalniki z zaprto komoro
· Ni združljivo z 0,2 mm šobo
· Obvezna uporaba ojačane jeklene šobe
Pred uporabo je potrebno filament posušiti
Trenutna različica ASA-CF 1 je ukinjena in po razprodaji zalog ne bo več na voljo. V prihodnje bomo predstavili novo verzijo. Spremljajte nas za nadaljnje novosti.
Cena:
32,76 €
39,97 € z DDV
Produkta ni na lokalni zalogi
Diameter: 1.75 mm
Net Filament Weight: 1 kg
Spool Material: ABS (Temperature resistance 70 °C)
Spool Size: Diameter: 200 mm; Height: 67 mm
Recommended Printing Settings:
Drying Settings before Printing: Blast Drying Oven: 65 °C, 8 h
X1 Series Printer Heatbed: 75 - 85 °C, 12 h
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with desiccant)
Nozzle Size: 0.4, 0.6, 0.8 mm
Nozzle Temperature: 240 - 270 °C
Build Plate Type: Engineering Plate, High Temperature Plate, or Textured PEI Plate
Build Plate Surface Preparation: Glue
Bed Temperature: 65 - 75 °C
Cooling Fan: 0 - 60%
Printing Speed: < 200 mm/s
Retraction Length: 0.8 - 1.4 mm
Retraction Speed: 30 - 60 mm/s
Chamber Temperature: 35 - 50 °C
Max Overhang Angle: ~70°
Max Bridging Length: ~30 mm
Support: Turn on
Properties:
Density: 1.25 g/cm3
Melt Index: 19.3 ± 2.4 g/10 min (250 °C, 2.16 kg)
Melting Temperature: 225 °C
Glass Transition Temperature: 68 °C
Vicar Softening Temperature: 85 °C
Heat Deflection Temperature (1.8 MPa): 68 °C
Heat Deflection Temperature (0.45 MPa): 74 °C
Saturated Water Absorption Rate: 0.30% (25 °C, 55% RH)
Mechanical Properties:
Young's Modulus (X-Y): 2460 ± 230 MPa
Young's Modulus (Z): 1340 ± 150 MPa
Tensile Strength (X-Y): 35 ± 5 MPa
Tensile Strength (Z): 29 ± 4 MPa
Breaking Elongation Rate (X-Y): 10.4 ± 0.6 %
Breaking Elongation Rate (Z): 4.7 ± 0.4 %
Bending Modulus (X-Y): 2910 ± 260 MPa
Bending Modulus (Z): 1560 ± 180 MPa
Bending Strength (X-Y): 70 ± 5 MPa
Bending Strength (Z): 48 ± 4 MPa
Impact Strength (X-Y): 41.2 ± 2.6 kJ/m2; 15.7 ± 1.6 kJ/m2 (notched)
Impact Strength (Z): 10.7 ± 1.6 kJ/m2
Other Physical and Chemical Properties:
Odor: Odorless
Composition: PETG, carbon fiber
Skin Hazards: No hazard
Chemical Stability: Stable under normal storage and handling conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant to some organic solvents
Resistance to Oil and Grease: Resistant to most kinds of oil and grease
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion Products: Odorless
Specimen Test:
Nozzle Temperature: 255 °C
Bed Temperature: 70 °C
Printing Speed: 150 mm/s
Infill Density: 100%
