PAHT-CF - Black (s kolutom) 0,5kg
Bambu Lab
Opis izdelka
PAHT-CF je kompozit PA12 in karbonskih vlaken.
Bambu PAHT-CF združuje nizko absorpcijo vlage značilno za PA12 z visoko zmogljivostjo ogljikovih vlaken. Tiskani deli ohranjajo odlične mehanske in toplotne lastnosti, tudi kadar so izpostavljeni vlagi. Zaradi izboljšane adhezije med plastmi in večje fleksibilnosti je material idealen za:
· funkcionalne prototipe,
· vpenjala za strojno obdelavo,
· kalupe za brizganje,
· šablone in
· proizvodne dele v manjših serijah.
Z do 50 % nižjo absorpcijo vode v primerjavi z običajnim PA-CF, Bambu PAHT-CF ohranja dimenzijsko stabilnost in mehanske lastnosti tudi v vlažnem okolju.
Lastnosti izdelka
· Nizka absorpcija vlage
· Izjemne mehanske lastnosti
· Odličen oprijem med plastmi
· Visoka natezna trdnost
· Premer: 1,75 mm ± 0,03 mm
Opozorila za uporabo
· Priporočena šoba: 0,6 mm
· Ni združljivo z 0,2 mm šobo
· Ni priporočljiva uporaba šobe iz nerjavečega jekla
· Filament je treba posušiti pred uporabo
· Tiskajte samo v zaprtih tiskalnikih
PAHT-CF je nadgrajena različica PA-CF, ki je bil ukinjen.
Cena:
45,37 €
55,35 € z DDV
Produkta ni na lokalni zalogi
Diameter: 1.75 mm
Net Filament Weight: 0.5 kg, 1 kg
Spool Material: PC + ABS (Temperature resistance 90 °C)
Spool Size: Diameter: 200 mm; Height: 67 mm
Recommended Printing Settings
Drying Settings before Printing: Blast Drying Oven: 80 °C, 8 - 12 h
X1 Series Printer Heatbed: 90 - 100 °C, 12 h
Printing and Storage Humidity: < 20% RH (Sealed with desiccant)
Bed Type: Engineering Plate, High Temperature Plate or Textured PEI Plate
Nozzle Size: 0.4, 0.6 (Recommended), 0.8 mm
Nozzle Temperature: 260 - 290 °C
Bed Surface Preparation: Glue
Bed Temperature: 80 - 100 °C
Cooling Fan: 0 - 40%
Printing Speed: < 100 mm/s
Retraction Length: 0.8 - 1.4 mm
Retraction Speed: 20 - 40 mm/s
Chamber Temperature: 45 - 60 °C
Max Overhang Angle: ~ 70 °
Max Bridging Length: ~ 40 mm
Support Material: Bambu Support for PA/PET
Properties
Bambu Lab has tested the differing aspects in the performance of PAHT-CF material, including physical, mechanical, and chemical properties. Typical values are listed as follows:
Physical Properties
Density: ISO 1183, 1.06 g/cm3
Melt Index: 280 °C, 2.16 kg, 14.4 ± 2.0 g/10 min
Melting Temperature: DSC, 10 °C/min, 225 °C
Glass Transition Temperature: DSC, 10 °C/min, 70 °C
Crystallization Temperature: DSC, 10 °C/min, 140 °C
Vicat Softening Temperature: ISO 306, GB/T 1633, 220 °C
Heat Deflection Temperature (1.8 MPa): ISO 75, 170 °C
Heat Deflection Temperature (0.45 MPa): ISO 75, 194 °C
Saturated Water Absorption Rate: 25 °C, 55% RH, 0.88%
Mechanical Properties (Dry state)
Young's Modulus (X-Y): ISO 527, GB/T 1040, 3860 ± 230 MPa
Young's Modulus (Z): ISO 527, GB/T 1040, 2180 ± 130 MPa
Tensile Strength (X-Y): ISO 527, GB/T 1040, 92 ± 7 MPa
Tensile Strength (Z): ISO 527, GB/T 1040, 47 ± 5 MPa
Breaking Elongation Rate (X-Y): ISO 527, GB/T 1040, 8.4 ± 1.8 %
Breaking Elongation Rate (Z): ISO 527, GB/T 1040, 4.1 ± 1.2 %
Bending Modulus (X-Y): ISO 178, GB/T 9341, 4230 ± 210 MPa
Bending Modulus (Z): ISO 178, GB/T 9341, 1820 ± 170 MPa
Bending Strength (X-Y): ISO 178, GB/T 9341, 125 ± 7 MPa
Bending Strength (Z): ISO 178, GB/T 9341, 61 ± 5 MPa
Impact Strength (X-Y): ISO 179, GB/T 1043, 57.5 ± 3.4 kJ/m2; 22.8 ± 1.8 kJ/m2 (notched)
Impact Strength (Z): ISO 179, GB/T 1043, 13.3 ± 0.8 kJ/m2
Other Physical and Chemical Properties
Odor: Odorless
Composition: PA 12 and other long-chain PA, carbon fiber
Skin Hazards: No hazard
Chemical Stability: Stable under normal storage and handling conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant to some organic solvents
Resistance to Oil and Grease: Resistant to most kinds of oil and grease
Flammability: Flammable
Combustion Products: Water, carbon oxides, nitrogen oxides
Odor of Combustion Products: Pungent odor
Specimen Test Printing Conditions
Nozzle Temperature: 290 °C
Bed Temperature: 100 °C
Printing Speed: 100 mm/s
Infill Density: 100%
