PET-CF black (s kolutom) 0,5 kg
Bambu Lab
Opis izdelka
Bambu PET-CF je mešanica trdnega PET in karbonskih vlaken.
Karbonska vlakna povečajo trdnost in mehanske lastnosti, hkrati pa ohranjajo nizko upogibanje in krčenje značilno za PET. Material se ponaša z odlično toplotno odpornostjo in mehkim sijajem.
Zaradi svoje trdnosti, toplotne odpornosti, dimenzijske stabilnosti in nizke absorpcije vlage je Bambu PET-CF idealen za nosilne konstrukcije in tisk v vročih in vlažnih okoljih.
Lastnosti izdelka
· Zelo nizka absorpcija vlage
· Izjemne mehanske lastnosti
· Visoka dimenzijska stabilnost
· Izjemna toplotna odpornost
· Premer: 1,75 mm ± 0,03 mm
· Ni združljiv z AMS
Opozorila za uporabo
· Ni združljiv z 0,2 mm šobo
· Ni priporočljiva uporaba šobe iz nerjavečega jekla
· Filament je treba posušiti pred uporabo
Cena:
41,17 €
50,23 € z DDV
Produkta ni na lokalni zalogi
Diameter: 1.75 mm
Net Filament Weight: 0.5 kg, 1 kg
Spool Material: PC + ABS (Temperature resistance 90 °C)
Spool Size: Diameter: 200 mm; Height: 67 mm
Recommended Printing Settings
Drying Settings before Printing: Blast Drying Oven: 80 °C, 8 - 12 h
X1 Series Printer Heatbed: 90 - 100 °C, 12 h
Printing and Storage Humidity: < 20% RH (Sealed with desiccant)
Bed Type: Engineering Plate, High Temperature Plate or Textured PEI Plate
Nozzle Size: 0.4, 0.6 (Recommended), 0.8 mm
Nozzle Temperature: 260 - 290 °C
Bed Surface Preparation: Glue
Bed Temperature: 80 - 100 °C
Cooling Fan: 0 - 60%
Printing Speed: < 100 mm/s
Retraction Length: 0.8 - 1.4 mm
Retraction Speed: 20 - 40 mm/s
Chamber Temperature: 45 - 60 °C
Max Overhang Angle: ~ 70 °
Max Bridging Length: ~ 30 mm
Support Material: Support for PA/PET
Properties
Bambu Lab has tested the differing aspects in the performance of PET-CF material, including physical, mechanical, and chemical properties. Typical values are listed as follows:
Physical Properties
Density: ISO 1183, 1.29 g/cm3
Melt Index: 280 °C, 2.16 kg, 25.3 ± 2.5 g/10 min
Melting Temperature: DSC, 10 °C/min, 250 °C
Glass Transition Temperature: DSC, 10 °C/min, 75 °C
Crystallization Temperature: DSC, 10 °C/min, 130 °C
Vicat Softening Temperature: ISO 306, GB/T 1633, 226 °C
Heat Deflection Temperature (1.8 MPa): ISO 75, 182 °C
Heat Deflection Temperature (0.45 MPa): ISO 75, 205 °C
Saturated Water Absorption Rate: 25 °C, 55% RH, 0.37%
Mechanical Properties (Dry state)
Young's Modulus (X-Y): ISO 527, GB/T 1040, 4730 ± 260 MPa
Young's Modulus (Z): ISO 527, GB/T 1040, 2160 ± 170 MPa
Tensile Strength (X-Y): ISO 527, GB/T 1040, 74 ± 6 MPa
Tensile Strength (Z): ISO 527, GB/T 1040, 35 ± 5 MPa
Breaking Elongation Rate (X-Y): ISO 527, GB/T 1040, 4.5 ± 1.2 %
Breaking Elongation Rate (Z): ISO 527, GB/T 1040, 2.4 ± 0.8 %
Bending Modulus (X-Y): ISO 178, GB/T 9341, 5320 ± 270 MPa
Bending Modulus (Z): ISO 178, GB/T 9341, 2210 ± 180 MPa
Bending Strength (X-Y): ISO 178, GB/T 9341, 131 ± 6 MPa
Bending Strength (Z): ISO 178, GB/T 9341, 49 ± 5 MPa
Impact Strength (X-Y): ISO 179, GB/T 1043, 36.0 ± 2.7 kJ/m2; 8.6 ± 0.5 kJ/m2 (notched)
Impact Strength (Z): ISO 179, GB/T 1043, 4.5 ± 0.6 kJ/m2
Other Physical and Chemical Properties
Odor: Odorless
Composition: Polyethylene terephthalate, carbon fiber
Skin Hazards: No hazard
Chemical Stability: Stable under normal storage and handling conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant to some organic solvents
Resistance to Oil and Grease: Resistant to most kinds of oil and grease
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion Products: Pungent odor
Specimen Test Printing Conditions
Nozzle Temperature: 270 °C
Bed Temperature: 80 °C
Printing Speed: 100 mm/s
Infill Density: 100%
