PETG-CF - Indigo Blue (s kolutom) 1kg
Bambu Lab
PETG-CF je kompozitni material, sestavljen iz PETG in karbonskih vlaken. Nova formula je v primerjavi s tradicionalnim PETG močno izboljšala kakovost tiska z zmanjšanjem možnosti zamašitve šob in nabiranja grudic. Z dodatkom ogljikovih vlaken nudi Bambu PETG-CF izboljšano trdnost, hkrati pa ohranja dobro prožnost in sijoč videz. Je idealen material za dele brezpilotnih letal, dirkalne modele in različne funkcionalne dele, ki zahtevajo visoko zmogljivost, zlasti udarno trdnost, in eleganten videz.
Lastnosti izdelka:
Manj grudic in nitk
Premium videz končne površine
Izboljšane mehanske lastnosti in visoka fleksibilnost
Premer: 1,75 mm +/- 0,03 mm
Združljiv z AMS
Opozorila za uporabo:
Ni združljiv z 0,2 mm šobo
Ni priporočljiva uporaba šobe iz nerjavečega jekla
Posušite pred uporabo za najvišjo kakovost končnega izdelka
Uporaba z AMS Lite ni idealna oz. priporočljiva
Lastnosti izdelka:
Manj grudic in nitk
Premium videz končne površine
Izboljšane mehanske lastnosti in visoka fleksibilnost
Premer: 1,75 mm +/- 0,03 mm
Združljiv z AMS
Opozorila za uporabo:
Ni združljiv z 0,2 mm šobo
Ni priporočljiva uporaba šobe iz nerjavečega jekla
Posušite pred uporabo za najvišjo kakovost končnega izdelka
Uporaba z AMS Lite ni idealna oz. priporočljiva
Izberite opcijo:
Cena:
30,24 €
36,89 € z DDV
Zaloga: 9
Specifications
Diameter: 1.75 mm
Net Filament Weight: 1 kg
Spool Material: ABS (Temperature resistance 70 °C)
Spool Size: Diameter: 200 mm; Height: 67 mm
Recommended Printing Settings:
Drying Settings before Printing: Blast Drying Oven: 65 °C, 8 h
X1 Series Printer Heatbed: 75 - 85 °C, 12 h
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with desiccant)
Nozzle Size: 0.4, 0.6, 0.8 mm
Nozzle Temperature: 240 - 270 °C
Build Plate Type: Engineering Plate, High Temperature Plate, or Textured PEI Plate
Build Plate Surface Preparation: Glue
Bed Temperature: 65 - 75 °C
Cooling Fan: 0 - 60%
Printing Speed: < 200 mm/s
Retraction Length: 0.8 - 1.4 mm
Retraction Speed: 30 - 60 mm/s
Chamber Temperature: 35 - 50 °C
Max Overhang Angle: ~70°
Max Bridging Length: ~30 mm
Support: Turn on
Properties:
Density: 1.25 g/cm3
Melt Index: 19.3 ± 2.4 g/10 min (250 °C, 2.16 kg)
Melting Temperature: 225 °C
Glass Transition Temperature: 68 °C
Vicar Softening Temperature: 85 °C
Heat Deflection Temperature (1.8 MPa): 68 °C
Heat Deflection Temperature (0.45 MPa): 74 °C
Saturated Water Absorption Rate: 0.30% (25 °C, 55% RH)
Mechanical Properties:
Young's Modulus (X-Y): 2460 ± 230 MPa
Young's Modulus (Z): 1340 ± 150 MPa
Tensile Strength (X-Y): 35 ± 5 MPa
Tensile Strength (Z): 29 ± 4 MPa
Breaking Elongation Rate (X-Y): 10.4 ± 0.6 %
Breaking Elongation Rate (Z): 4.7 ± 0.4 %
Bending Modulus (X-Y): 2910 ± 260 MPa
Bending Modulus (Z): 1560 ± 180 MPa
Bending Strength (X-Y): 70 ± 5 MPa
Bending Strength (Z): 48 ± 4 MPa
Impact Strength (X-Y): 41.2 ± 2.6 kJ/m2; 15.7 ± 1.6 kJ/m2 (notched)
Impact Strength (Z): 10.7 ± 1.6 kJ/m2
Other Physical and Chemical Properties:
Odor: Odorless
Composition: PETG, carbon fiber
Skin Hazards: No hazard
Chemical Stability: Stable under normal storage and handling conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant to some organic solvents
Resistance to Oil and Grease: Resistant to most kinds of oil and grease
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion Products: Odorless
Specimen Test:
Nozzle Temperature: 255 °C
Bed Temperature: 70 °C
Printing Speed: 150 mm/s
Infill Density: 100%
Diameter: 1.75 mm
Net Filament Weight: 1 kg
Spool Material: ABS (Temperature resistance 70 °C)
Spool Size: Diameter: 200 mm; Height: 67 mm
Recommended Printing Settings:
Drying Settings before Printing: Blast Drying Oven: 65 °C, 8 h
X1 Series Printer Heatbed: 75 - 85 °C, 12 h
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with desiccant)
Nozzle Size: 0.4, 0.6, 0.8 mm
Nozzle Temperature: 240 - 270 °C
Build Plate Type: Engineering Plate, High Temperature Plate, or Textured PEI Plate
Build Plate Surface Preparation: Glue
Bed Temperature: 65 - 75 °C
Cooling Fan: 0 - 60%
Printing Speed: < 200 mm/s
Retraction Length: 0.8 - 1.4 mm
Retraction Speed: 30 - 60 mm/s
Chamber Temperature: 35 - 50 °C
Max Overhang Angle: ~70°
Max Bridging Length: ~30 mm
Support: Turn on
Properties:
Density: 1.25 g/cm3
Melt Index: 19.3 ± 2.4 g/10 min (250 °C, 2.16 kg)
Melting Temperature: 225 °C
Glass Transition Temperature: 68 °C
Vicar Softening Temperature: 85 °C
Heat Deflection Temperature (1.8 MPa): 68 °C
Heat Deflection Temperature (0.45 MPa): 74 °C
Saturated Water Absorption Rate: 0.30% (25 °C, 55% RH)
Mechanical Properties:
Young's Modulus (X-Y): 2460 ± 230 MPa
Young's Modulus (Z): 1340 ± 150 MPa
Tensile Strength (X-Y): 35 ± 5 MPa
Tensile Strength (Z): 29 ± 4 MPa
Breaking Elongation Rate (X-Y): 10.4 ± 0.6 %
Breaking Elongation Rate (Z): 4.7 ± 0.4 %
Bending Modulus (X-Y): 2910 ± 260 MPa
Bending Modulus (Z): 1560 ± 180 MPa
Bending Strength (X-Y): 70 ± 5 MPa
Bending Strength (Z): 48 ± 4 MPa
Impact Strength (X-Y): 41.2 ± 2.6 kJ/m2; 15.7 ± 1.6 kJ/m2 (notched)
Impact Strength (Z): 10.7 ± 1.6 kJ/m2
Other Physical and Chemical Properties:
Odor: Odorless
Composition: PETG, carbon fiber
Skin Hazards: No hazard
Chemical Stability: Stable under normal storage and handling conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant to some organic solvents
Resistance to Oil and Grease: Resistant to most kinds of oil and grease
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion Products: Odorless
Specimen Test:
Nozzle Temperature: 255 °C
Bed Temperature: 70 °C
Printing Speed: 150 mm/s
Infill Density: 100%
