PLA Aero - White (s kolutom) 1kg
Bambu Lab
PLA Aero filament nizko gostoto in majhno težo doseže tako, da se med tiskanjem pri visokih temperaturah peni in ustvarja majhne zračne luknje znotraj odtisov. Je popolna izbira za lahke in energetsko varčne izdelke, predvsem zračna plovila brez posadke (UAV), aerodinamične modele in jadralna letala.
Penasti materiali PLA (PLA Aero) imajo visoke zahteve glede sušenja in nastavitve parametrov, zato pred začetkom tiskanja natančno preberite navodila za tiskanje s peno PLA Aero.
Lastnosti izdelka:
Prilagojen za tiskanje 3D RC letal
Nizka gostota in majhna teža
Trpežen z dobro odpornostjo na udarce
Mat površina za enostavno barvanje
Priložen osnovni kolut za večkratno uporabo
Premer: 1,75 mm +/- 0,03 mm
Združljiv z AMS
Opozorila za uporabo:
Priporočljivo je, da se pred uporabo posuši
Penasti materiali PLA (PLA Aero) imajo visoke zahteve glede sušenja in nastavitve parametrov, zato pred začetkom tiskanja natančno preberite navodila za tiskanje s peno PLA Aero.
Lastnosti izdelka:
Prilagojen za tiskanje 3D RC letal
Nizka gostota in majhna teža
Trpežen z dobro odpornostjo na udarce
Mat površina za enostavno barvanje
Priložen osnovni kolut za večkratno uporabo
Premer: 1,75 mm +/- 0,03 mm
Združljiv z AMS
Opozorila za uporabo:
Priporočljivo je, da se pred uporabo posuši
Cena:
40,33 €
49,20 € z DDV
Zaloga: 7
Specifications
Filament Diameter: 1.75 mm
Net Filament Weight: 1 kg
Spool Material: ABS (Temperature resistance: 70°C)
Spool Diameter: 200 mm
Spool Height: 67 mm
Recommended Printing Settings
Drying Settings before Printing:
- Blast Drying Oven: 55°C, 8 hours
- X1 Series Printer Heatbed: 65 - 75°C, 12 hours
Printing and Storage Humidity: < 20% RH (Sealed, with desiccant)
Nozzle Size: 0.4, 0.6, 0.8 mm
Nozzle Temperature: 210 - 260°C
Bed Type: Cool Plate, High Temperature Plate, or Textured PEI Plate
Bed Surface Preparation: Glue
Bed Temperature: 35 - 45°C
Cooling Fan: Turn on
Printing Speed: < 180 mm/s
Retraction Length: 0.6 - 1.0 mm
Retraction Speed: 20 - 40 mm/s
Chamber Temperature: 25 - 45°C
Max Overhang Angle: 55°
Max Bridging Length: 30 mm
Support Material: Support for PLA
Physical Properties
Density (ISO 1183): 1.21 g/cm3 (filament)
Melt Index (260°C, 2.16 kg): 7.7 ± 0.6 g/10 min
Melting Temperature (DSC, 10°C/min): 153°C
Glass Transition Temperature (DSC, 10°C/min): 55°C
Crystallization Temperature (DSC, 10°C/min): /
Vicat Softening Temperature (ISO 306, GB/T 1633): 54°C
Heat Deflection Temperature (ISO 75, 1.8 MPa): 48°C
Heat Deflection Temperature (ISO 75, 0.45 MPa): 53°C
Saturated Water Absorption Rate (25°C, 55% RH): 0.45%
Mechanical Properties
Young's Modulus (X-Y, ISO 527, GB/T 1040): 1350 ± 250 MPa
Young's Modulus (Z, ISO 527, GB/T 1040): 1240 ± 180 MPa
Tensile Strength (X-Y, ISO 527, GB/T 1040): 24 ± 2 MPa
Tensile Strength (Z, ISO 527, GB/T 1040): 18 ± 3 MPa
Breaking Elongation Rate (X-Y, ISO 527, GB/T 1040): 2.6 ± 0.7 %
Breaking Elongation Rate (Z, ISO 527, GB/T 1040): 1.2 ± 0.4 %
Bending Modulus (X-Y, ISO 178, GB/T 9341): 1690 ± 120 MPa
Bending Modulus (Z, ISO 178, GB/T 9341): 1410 ± 80 MPa
Bending Strength (X-Y, ISO 178, GB/T 9341): 45 ± 4 MPa
Bending Strength (Z, ISO 178, GB/T 9341): 17 ± 3 MPa
Impact Strength (X-Y, ISO 179, GB/T 1043): 28.8 ± 1.3 kJ/m2; 8.2 ± 0.7 kJ/m2 (notched)
Impact Strength (Z, ISO 179, GB/T 1043): 3.1 ± 0.7 kJ/m2
Other Physical and Chemical Properties
Odor: Odorless
Composition: Polylactic acid
Skin Hazards: No hazard
Chemical Stability: Stable under normal storage and handling conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant to some organic solvents
Resistance to Oil and Grease: Resistant to most oils and grease
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion: Odorless
Specimen Test Printing Conditions
Nozzle Temperature: 210°C
Bed Temperature: 35°C
Printing Speed: 150 mm/s
Infill Density: 100%
Filament Diameter: 1.75 mm
Net Filament Weight: 1 kg
Spool Material: ABS (Temperature resistance: 70°C)
Spool Diameter: 200 mm
Spool Height: 67 mm
Recommended Printing Settings
Drying Settings before Printing:
- Blast Drying Oven: 55°C, 8 hours
- X1 Series Printer Heatbed: 65 - 75°C, 12 hours
Printing and Storage Humidity: < 20% RH (Sealed, with desiccant)
Nozzle Size: 0.4, 0.6, 0.8 mm
Nozzle Temperature: 210 - 260°C
Bed Type: Cool Plate, High Temperature Plate, or Textured PEI Plate
Bed Surface Preparation: Glue
Bed Temperature: 35 - 45°C
Cooling Fan: Turn on
Printing Speed: < 180 mm/s
Retraction Length: 0.6 - 1.0 mm
Retraction Speed: 20 - 40 mm/s
Chamber Temperature: 25 - 45°C
Max Overhang Angle: 55°
Max Bridging Length: 30 mm
Support Material: Support for PLA
Physical Properties
Density (ISO 1183): 1.21 g/cm3 (filament)
Melt Index (260°C, 2.16 kg): 7.7 ± 0.6 g/10 min
Melting Temperature (DSC, 10°C/min): 153°C
Glass Transition Temperature (DSC, 10°C/min): 55°C
Crystallization Temperature (DSC, 10°C/min): /
Vicat Softening Temperature (ISO 306, GB/T 1633): 54°C
Heat Deflection Temperature (ISO 75, 1.8 MPa): 48°C
Heat Deflection Temperature (ISO 75, 0.45 MPa): 53°C
Saturated Water Absorption Rate (25°C, 55% RH): 0.45%
Mechanical Properties
Young's Modulus (X-Y, ISO 527, GB/T 1040): 1350 ± 250 MPa
Young's Modulus (Z, ISO 527, GB/T 1040): 1240 ± 180 MPa
Tensile Strength (X-Y, ISO 527, GB/T 1040): 24 ± 2 MPa
Tensile Strength (Z, ISO 527, GB/T 1040): 18 ± 3 MPa
Breaking Elongation Rate (X-Y, ISO 527, GB/T 1040): 2.6 ± 0.7 %
Breaking Elongation Rate (Z, ISO 527, GB/T 1040): 1.2 ± 0.4 %
Bending Modulus (X-Y, ISO 178, GB/T 9341): 1690 ± 120 MPa
Bending Modulus (Z, ISO 178, GB/T 9341): 1410 ± 80 MPa
Bending Strength (X-Y, ISO 178, GB/T 9341): 45 ± 4 MPa
Bending Strength (Z, ISO 178, GB/T 9341): 17 ± 3 MPa
Impact Strength (X-Y, ISO 179, GB/T 1043): 28.8 ± 1.3 kJ/m2; 8.2 ± 0.7 kJ/m2 (notched)
Impact Strength (Z, ISO 179, GB/T 1043): 3.1 ± 0.7 kJ/m2
Other Physical and Chemical Properties
Odor: Odorless
Composition: Polylactic acid
Skin Hazards: No hazard
Chemical Stability: Stable under normal storage and handling conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant to some organic solvents
Resistance to Oil and Grease: Resistant to most oils and grease
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion: Odorless
Specimen Test Printing Conditions
Nozzle Temperature: 210°C
Bed Temperature: 35°C
Printing Speed: 150 mm/s
Infill Density: 100%
