PLA Basic - Jade White (s kolutom) 1kg
Bambu Lab
PLA filament je priljubljen material za 3D tiskanje, izdelan iz obnovljivih virov, kot so koruzni škrob ali trsni sladkor. Poznan je po svoji enostavni uporabi, biološko razgradljivosti in primernosti za ustvarjanje podrobnih in barvitih 3D izdelkov. Ima najboljšo reprodukcijo podrobnosti med pogostimi filamenti za 3D tiskanje, kar ga naredi idealnega za modele, kjer je estetika pomembna. Vse parametre tiskanja najdete v RFID čipu, ki ga lahko preberete prek našega sistema AMS (Avtomatski sistem za material).
Lastnosti izdelka:
Enostavno tiskanje
Primeren za začetnike
Gladka površina
Biorazgradljiv
Premer: 1,75 mm +/- 0,03 mm
Združljiv z AMS (avtomatski sistem za material)
Lastnosti izdelka:
Enostavno tiskanje
Primeren za začetnike
Gladka površina
Biorazgradljiv
Premer: 1,75 mm +/- 0,03 mm
Združljiv z AMS (avtomatski sistem za material)
Tip izdelka
Izberite opcijo:
Cena:
21,84 €
26,64 € z DDV
Zaloga: 15
Specifications
Filament Diameter: 1.75 mm
Net Filament Weight: 1 kg
Spool Material: ABS (Temperature resistance: 70°C)
Spool Diameter: 200 mm
Spool Height: 67 mm
Recommended Printing Settings
Drying Settings before Printing: Blast Drying Oven: 55°C, 8 h
X1 Series Printer Heatbed: 65 - 75°C, 12 h
Printing and Storage Humidity: < 20% RH (Sealed with desiccant)
Nozzle Size: 0.2, 0.4, 0.6, 0.8 mm
Nozzle Temperature: 190 - 230°C
Bed Type: Cool Plate, High Temperature Plate, Textured PEI Plate
Bed Surface Preparation: Glue
Bed Temperature: 35 - 45°C
Cooling Fan: Turn on
Printing Speed: < 300 mm/s
Retraction Length: 0.6 - 1.0 mm
Retraction Speed: 20 - 40 mm/s
Chamber Temperature: 25 - 45°C
Max Overhang Angle: 55°
Max Bridging Length: 30 mm
Support Material: Support for PLA
Physical Properties
Density (ISO 1183): 1.24 g/cm3
Melt Index (210°C, 2.16 kg): 42.4 ± 3.5 g/10 min
Melting Temperature (DSC, 10°C/min): 160°C
Glass Transition Temperature (DSC, 10°C/min): 60°C
Crystallization Temperature (DSC, 10°C/min): N/A
Vicat Softening Temperature (ISO 306, GB/T 1633): 57°C
Heat Deflection Temperature (ISO 75, 1.8 MPa): 54°C
Heat Deflection Temperature (ISO 75, 0.45 MPa): 57°C
Saturated Water Absorption Rate (25°C, 55% RH): 0.43%
Mechanical Properties
Young's Modulus (X-Y, ISO 527, GB/T 1040): 2580 ± 220 MPa
Young's Modulus (Z, ISO 527, GB/T 1040): 2060 ± 170 MPa
Tensile Strength (X-Y, ISO 527, GB/T 1040): 35 ± 4 MPa
Tensile Strength (Z, ISO 527, GB/T 1040): 31 ± 3 MPa
Breaking Elongation Rate (X-Y, ISO 527, GB/T 1040): 12.2 ± 1.8 %
Breaking Elongation Rate (Z, ISO 527, GB/T 1040): 7.5 ± 1.3 %
Bending Modulus (X-Y, ISO 178, GB/T 9341): 2750 ± 160 MPa
Bending Modulus (Z, ISO 178, GB/T 9341): 2370 ± 150 MPa
Bending Strength (X-Y, ISO 178, GB/T 9341): 76 ± 5 MPa
Bending Strength (Z, ISO 178, GB/T 9341): 59 ± 6 MPa
Impact Strength (X-Y, ISO 179, GB/T 1043): 26.6 ± 2.8 kJ/m2; 7.9 ± 1.2 kJ/m2 (notched)
Impact Strength (Z, ISO 179, GB/T 1043): 13.8 ± 0.9 kJ/m2
Other Physical and Chemical Properties
Odor: Odorless
Skin Hazards: No hazard
Chemical Stability: Stable under normal conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant
Resistance to Oil and Grease: Resistant to most oils
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion: Odorless
Specimen Test Printing Conditions
Nozzle Temperature: 220°C
Bed Temperature: 35°C
Printing Speed: 200 mm/s
Infill Density: 100%
Filament Diameter: 1.75 mm
Net Filament Weight: 1 kg
Spool Material: ABS (Temperature resistance: 70°C)
Spool Diameter: 200 mm
Spool Height: 67 mm
Recommended Printing Settings
Drying Settings before Printing: Blast Drying Oven: 55°C, 8 h
X1 Series Printer Heatbed: 65 - 75°C, 12 h
Printing and Storage Humidity: < 20% RH (Sealed with desiccant)
Nozzle Size: 0.2, 0.4, 0.6, 0.8 mm
Nozzle Temperature: 190 - 230°C
Bed Type: Cool Plate, High Temperature Plate, Textured PEI Plate
Bed Surface Preparation: Glue
Bed Temperature: 35 - 45°C
Cooling Fan: Turn on
Printing Speed: < 300 mm/s
Retraction Length: 0.6 - 1.0 mm
Retraction Speed: 20 - 40 mm/s
Chamber Temperature: 25 - 45°C
Max Overhang Angle: 55°
Max Bridging Length: 30 mm
Support Material: Support for PLA
Physical Properties
Density (ISO 1183): 1.24 g/cm3
Melt Index (210°C, 2.16 kg): 42.4 ± 3.5 g/10 min
Melting Temperature (DSC, 10°C/min): 160°C
Glass Transition Temperature (DSC, 10°C/min): 60°C
Crystallization Temperature (DSC, 10°C/min): N/A
Vicat Softening Temperature (ISO 306, GB/T 1633): 57°C
Heat Deflection Temperature (ISO 75, 1.8 MPa): 54°C
Heat Deflection Temperature (ISO 75, 0.45 MPa): 57°C
Saturated Water Absorption Rate (25°C, 55% RH): 0.43%
Mechanical Properties
Young's Modulus (X-Y, ISO 527, GB/T 1040): 2580 ± 220 MPa
Young's Modulus (Z, ISO 527, GB/T 1040): 2060 ± 170 MPa
Tensile Strength (X-Y, ISO 527, GB/T 1040): 35 ± 4 MPa
Tensile Strength (Z, ISO 527, GB/T 1040): 31 ± 3 MPa
Breaking Elongation Rate (X-Y, ISO 527, GB/T 1040): 12.2 ± 1.8 %
Breaking Elongation Rate (Z, ISO 527, GB/T 1040): 7.5 ± 1.3 %
Bending Modulus (X-Y, ISO 178, GB/T 9341): 2750 ± 160 MPa
Bending Modulus (Z, ISO 178, GB/T 9341): 2370 ± 150 MPa
Bending Strength (X-Y, ISO 178, GB/T 9341): 76 ± 5 MPa
Bending Strength (Z, ISO 178, GB/T 9341): 59 ± 6 MPa
Impact Strength (X-Y, ISO 179, GB/T 1043): 26.6 ± 2.8 kJ/m2; 7.9 ± 1.2 kJ/m2 (notched)
Impact Strength (Z, ISO 179, GB/T 1043): 13.8 ± 0.9 kJ/m2
Other Physical and Chemical Properties
Odor: Odorless
Skin Hazards: No hazard
Chemical Stability: Stable under normal conditions
Solubility: Insoluble in water
Resistance to Acid: Not resistant
Resistance to Alkali: Not resistant
Resistance to Organic Solvent: Not resistant
Resistance to Oil and Grease: Resistant to most oils
Flammability: Flammable
Combustion Products: Water, carbon oxides
Odor of Combustion: Odorless
Specimen Test Printing Conditions
Nozzle Temperature: 220°C
Bed Temperature: 35°C
Printing Speed: 200 mm/s
Infill Density: 100%
